Size of laser condensation of laser generator: if the spot is small after aggregation, the cutting accuracy is high, and if the gap after cutting is small. It shows that the fiber laser cutting machine has high precision and good quality. However, the laser beam is conical, so the cut gap is also conical. Under this condition, the greater the thickness of the workpiece, the lower the accuracy will be, so the larger the kerf.
Accuracy of the workbench: if the accuracy of the workbench of the fiber laser cutting machine is very high, the cutting accuracy will also be increased. Therefore, the accuracy of the worktable is also an important factor to measure the accuracy of the laser generator.
The laser beam condenses into a cone: when the fiber laser cutting machine cuts, the laser beam is tapered downward. At this time, if the thickness of the cutting workpiece is large, the cutting accuracy will be reduced, and the cut gap will be large.
Different cutting materials: it will also affect the accuracy of the fiber laser cutting machine. In the same case, the precision of cutting stainless steel and aluminum by fiber laser cutting machine will be different. The cutting precision of stainless steel will be higher and the cutting surface will be smoother.
QUICK LINKS: FAQ | Charging Pile | Galvanized Corner Brackets | Kiosk Enclosure Manufacturer | 80 20 Corner Bracket | 3 Way Corner Bracket | Kiosk Enclosure | Stainless Steel Corner Brackets | Corner Bracket for Cabinet | Outdoor Telecom Cabinet | Sheet Metal Parts Pricelist